DBW series temperature changes send implement

0 reviews | Write a review

Brand: 春辉
Categories: Temperature transmitter
Product Code: XZEE16
SKU: CHWD260181
Availability: 3 Days

Description Reviews (0)

The product explains:

This series product department uses newest sheet piece the new product that development of machine technology development gives, it can spend sensor form a complete set with isotherm of the thermocouple of all sorts of different graduation date, thermal resistance, but with other DDZ-III model, composition of appearance of DDZ-II dynamoelectric and unit combination controls a system. Apply extensively already at industry now the changeover of signal of temperature of process of each domain production.

Product technology parameter

Renown Say	Say Bright
Indication intrinsic error	≤0.5%FS±1dig
Be defeated Go out Special Quality	Relay is outputted	3A/220VAC, 3A/24VDC When relay outputs contact to receive perceptual load, two end must receive load scintilla draws circuit; And take carry ability to decrease accordingly.
	Imitate changes send output (DC)	≥1KΩ of laden resistor of ≥1KΩ);1~5V(of laden resistor of <750Ω);0~5V(of laden resistor of <1.5KΩ);4~20mA(of 0~10mA(laden resistor)
	Power source output	24VDC/50mA or 24VDC/100mA (two) distribution output
Communication interface	Interface standard	RS485(user can appoint RS232)
	Deferent means	Half duplex operation
	Frame format	A start bit, 8 digit are occupied, 1 stops
	Deferent rate	300~9600bps, parameter but set
	Online stage is counted	Most 31, address parameter but set
	Network structure	3 lines (or 2 lines) network of much chance communication
Internal temperature is compensated	0~50 ℃ (undertake compensating by 0 ℃ when <0 ℃ )
Use environment	Environmental temperature	0~50 ℃
Use environment	Environmental humidity	≤90%RH
Power supply source	Power supply source	Power source of switch of 220AC, 220VAC() 24VDC(switch power source) or the user is special requirement
Power supply source	Power comsumption	≤6W
Heavy Quantity	≤400g

This series product is main characteristic and function:

1, Adopt set of simple soft, hardware, can wait for parameter to undertake choosing set to inputting type of signal of graduation date, span, output, all set parameter all but permanent save, and drop report not to lose data.

2, Can take segregation serial communication interface, transmission rate can adopt key-press freedom set, can input with all sorts of belts/ the equipment that exports communication function has two-way news report, comprise a network to control a system.

3, Each set parameter and debug parameter to be able to be decided with password lock, after the lock is piled up, can prevent to be operated by accident

Product type selecting is expressed

Model Chart									Say Bright
Model	DBW-								Product model
Type		1							Odd loop
		2							Double loop
Input signal			XY						X= the 1st road, Y= the 2nd (detailed sees a table one)
Output signal				XY					X= the 1st road, Y= the 2nd (detailed sees a table 2)
Power supply means					A				220VAC power source
					D				24VDC power source
Communication means						P			Take RS485 communication interface
Appearance structure							B	-	The wall registers form
							C	-	Slideway inserts outfit type
							G	-	Wear outfit type
Measure range									Measure range (the user is set oneself)

Input signal type (express one) :

Signal code	Input graduation date	Measure range	Unit	Fully Note
1	Thermal resistance Cu50	- 50.0~150.0	℃	Thermal resistance electric current: 0.25mA (100Ω/0 ℃ ) Resistor of the biggest lead: ≤10Ω
2	Thermal resistance Cu100	- 50.0~150.0
3	Thermal resistance Pt100	- 199.9~500.0
4	Thermocouple B	0~1800		400 ℃ are the following not plan measure precision
5	Thermocouple S	0~1600		200 ℃ are the following not plan measure precision
6	Thermocouple E	- 100~600		B: 400 ℃ do not measure precision below S: 200 ℃ do not measure precision below R: 200 ℃ do not measure precision below Input resistor: ≥10⁶Ω Resistor of the biggest lead: ≤100Ω
7	Thermocouple K	0~1300
8	Thermocouple J	- 100~1000
9	Thermocouple T	- 100~400
A	Thermocouple R	0~1700
B	Thermocouple N	0~1300
C	WRe3-WRe25	0~2300
D	WRe5-WRe26	0~2300

Output signal type (express 2) :

Code	Say Bright
10	First road 0~10mA output, the 2nd loop does not have output
20	First road 4~20mA output, the 2nd loop does not have output
11	The first, 2 loop: 0~10mA output
21	First road 4~20mA output, 0~10mA of the 2nd loop is outputted
12	First road 0~10mA output, 4~20mA of the 2nd loop is outputted
22	The first, 2 loop: 4~20mA output